Projects: Healthcare, University & Municipal

Boardrooms/Conference Rooms

LOCATION:  Healthcare Facility/Pennsylvania
OBJECTIVE: The objective of this project was to refresh the existing conference rooms, interior fit and finishes, the installation of new audio and visual equipment, and upgrade to LED area and task lighting, so that all systems could operate in concert with each other.  Redesign HVAC system so that both conference rooms would be able to maintain a constant room temperature when combined or operated as individual conference rooms.
PROJECT SIZE:  Approximately $640K


Bone Lab Design

LOCATION: Pennsylvania
OBJECTIVE: Renovate an existing lab to provide a new teaching lab for surgical techniques on the human skull.
PROJECT SIZE: 1,000 sq. ft.
SERVICES:

  1. MEP and Structural Engineering
  2. Construction Assistance

HIGHLIGHTS: The highlights of this project included the complete renovation of the HVAC, power, communication and data distribution systems within the building based on the new layout and the requirements of the labs. A new air compressor system was also installed which included the design of a CA distribution loop and drops for each teaching station in the lab.


Biological Research Room

LOCATION: Pennyslvania
PROJECT: Confocal Microscope Room
OBJECTIVE: Renovate existing office area for the installation of a new Confocal Microscope.
PROJECT SIZE: 250 sq. ft.

SERVICES:

  1. MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: The highlights of this project included the complete renovation of the HVAC, power and lighting system to support the installation of the new Confocal Microscope. The ventilation system was also modified to provide adequate ventilation to the microscope based on the vendor requirements.


Operating Room Renovation

LOCATION: Pennsylvania
OBJECTIVE: Provide the design to renovate an existing procedure room into a new operating room.
PROJECT SIZE: 500 sq. ft.

SERVICES:

  1. MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: The highlights of this project included the engineering and design to modify the existing HVAC system to ensure proper air flow and to design the new med gas lines for the operating room.


Administration Area Renovation Project

LOCATION: Pennsylvania

SERVICES:

  1. MEP & Structural Engineering
  2. Construction Assistance

HIGHLIGHTS: Provide the design to renovate the existing area and provide new offices, meeting rooms and concession area for the admissions office.


Lighting Suite/Dark Room Design

LOCATION: Pennsylvania

SERVICES:

  1. Design & MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: Provide the design to construct a testing suite to observe the affects of lighting on people.


Clean Room Design

LOCATION: Pennsylvania

SERVICES:

  1. Design & MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: Provide the design to renovate an existing office area to create a new clean room space for drug dispensing based on USP 797 guidelines.


Dish Washer Installation Project

LOCATION: Pennsylvania

SERVICES:

  1. Design & MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: Provide the design to replace an existing industrial size dish washing machine and install a new dish washing machine with conveyor line for the university and hospital.


Anatomy/Chemistry Room B22 Cryo Facility

LOCATION: Pennsylvania

SERVICES:

  1. MEP Engineering
  2. Construction Assistance

HIGHLIGHTS: Renovate the existing office/storage room into a new cryogenic filling and storage area.


Engineering Projects – Expense Work

LOCATION: Pennsylvania

SERVICES:

  1. MEP & Structural Engineering
  2. Construction Assistance

HIGHLIGHTS: Provide support for a variety of smaller engineering and design projects for the building owners.